[ase-users] [gpaw-users] ASE installation for windows
Marcin Dulak
Marcin.Dulak at fysik.dtu.dk
Sat Nov 8 17:36:34 CET 2014
On 11/08/2014 12:02 PM, Zahid Hasan wrote:
> Yes, I have experienced the problem, when tried to convert the
> trajectory file to pdb. The datas are missing there. Unfortunately I
> could not open even the ASE trajectory format in VMD, although VMD
> accepts trajectory input. Is the ASE-trajectory compatible with VMD?
what is the error message you get when converting with ase-gui?
VMD does not read traj files.
This works for me on Windows (with the ASE msi installed after GPAW msi):
from ase.structure import molecule
from ase.calculators.emt import EMT
from ase.optimize import QuasiNewton
m=molecule('H2O') # H2O from the G2 set
m.set_calculator(EMT())
o=QuasiNewton(m, trajectory='m.traj')
o.run()
Then, in the command prompt:
ase-gui m.traj -o m.xyz
>
> And one more question, I wanted to simulate Epoxy molecule with ASE.
> How I can find out which molecules are available in the ASE databank?
> And is there any way to generate the molecule in other software and
> import in ASE for further simulation?
when molecules are concerned ASE can read xyz, pdb files which you can
generate in other programs.
You can list the molecule names by accessing the modules located under
the ase/data directory:
from ase.data.g2 import data # this is the G2 set
print data.keys()
or
from ase.data.tmfp06d import data # doi:10.1063/1.2162161
print data.keys()
In order to use a set different that G2 (see help for the molecule
method: python -c "from ase.structure import molecule; help(molecule)"):
from ase.data.tmfp06d import data as tmfp06d
from ase.structure import molecule
molecule('ScH', data=tmfp06d)
The way different molecule sets are accessed in currently not unified in
ASE - they were
created ad hoc for the purpose of different projects.
Best regards,
Marcin
>
> Thanks and regards,
> Zahid
>
> On Fri, Nov 7, 2014 at 9:35 AM, Marcin Dulak
> <Marcin.Dulak at fysik.dtu.dk <mailto:Marcin.Dulak at fysik.dtu.dk>> wrote:
>
> On 11/06/2014 03:35 PM, Zahid Hasan wrote:
>> If I save the result file in .pdb format with the commands
>>
>> dyn = QuasiNewton(slab, trajectory='N2Cu.pdb')
> QuasiNewton trajectory keyword saves a file in trajectory format,
> no matter how you name it.
> You can convert the trajectory file into an xyz (or pdb) with:
> ase-gui -o N2Cu.pdb N2Cu.traj
> Note that you miss some information contained in the traj files
> when doing
> the conversion to xyz/pdb (cell, local magnetic moments,
> constraints, ...)
> Therefore it's better to work with trajectory files and visualize
> them with ase-gui.
>>
>> is it possible to open the file and see the results in VMD?
> yes.
>
> Best regards,
>
> Marcin
>
>>
>>
>> On Thu, Nov 6, 2014 at 1:54 PM, Marcin Dulak
>> <Marcin.Dulak at fysik.dtu.dk <mailto:Marcin.Dulak at fysik.dtu.dk>> wrote:
>>
>> On 11/06/2014 01:17 PM, Zahid Hasan wrote:
>>> Dear all,
>>> Do I need to install Povray seperately to generate image? Is
>>> this the software provided in the website
>>> http://www.povray.org/download/
>> yes, but povray won't work directly with ASE on windows due
>> to Linux oriented os.system calls in
>> https://trac.fysik.dtu.dk/projects/ase/browser/trunk/ase/io/pov.py
>> (povray ... > /dev/null, etc.).
>> Instead you can create the pov/ini povray files with an ASE
>> python script and then open the pov file with povray.
>>
>> Another problem you may encounter is when using ase.lattice
>> module.
>> For some reasons the
>> https://trac.fysik.dtu.dk/projects/ase/browser/trunk/ase/lattice/spacegroup/spacegroup.dat
>> is not copied
>> during the msi installation of ASE to
>> C:\Python27\LIb\site-packages\ase\lattice\spacegroup.
>> You need to download this file manually.
>>
>> Best regards,
>>
>> Marcin
>>>
>>> Thanks,
>>> Zahid
>>>
>>> On Tue, Nov 4, 2014 at 11:52 AM, Zahid Hasan
>>> <missionpagla at gmail.com <mailto:missionpagla at gmail.com>> wrote:
>>>
>>> I will request to just upload seperate windows msi
>>> installers, which are compatible with each other and
>>> updated.
>>>
>>> On Tue, Nov 4, 2014 at 11:48 AM, Zahid Hasan
>>> <missionpagla at gmail.com <mailto:missionpagla at gmail.com>>
>>> wrote:
>>>
>>> I have deinstalled the ASE and installed the GPAW
>>> installer with ASE inside. But unfortunately the
>>> test scripts do not work. It works only when the
>>> seperate ASE installation is existing. Even after
>>> the GPAW test run it shows runtime error, although
>>> it delivers some results!!
>>>
>>> On Tue, Nov 4, 2014 at 11:35 AM, Marcin Dulak
>>> <Marcin.Dulak at fysik.dtu.dk
>>> <mailto:Marcin.Dulak at fysik.dtu.dk>> wrote:
>>>
>>> Hi,
>>>
>>> yes, GPAW installer includes ASE.
>>>
>>> Best regards,
>>>
>>> Marcin
>>>
>>>
>>> On 11/04/2014 10:59 AM, Zahid Hasan wrote:
>>>
>>> The installer includes also the latest ASE
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> ase-users mailing list
>>> ase-users at listserv.fysik.dtu.dk <mailto:ase-users at listserv.fysik.dtu.dk>
>>> https://listserv.fysik.dtu.dk/mailman/listinfo/ase-users
>>
>>
>>
>>
>> _______________________________________________
>> ase-users mailing list
>> ase-users at listserv.fysik.dtu.dk <mailto:ase-users at listserv.fysik.dtu.dk>
>> https://listserv.fysik.dtu.dk/mailman/listinfo/ase-users
>
>
>
>
> _______________________________________________
> ase-users mailing list
> ase-users at listserv.fysik.dtu.dk
> https://listserv.fysik.dtu.dk/mailman/listinfo/ase-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listserv.fysik.dtu.dk/pipermail/ase-users/attachments/20141108/1f84451c/attachment.html>
More information about the ase-users
mailing list