[gpaw-users] [gpaw-developers] gpaw tests fail on Ubuntu 12.04

[Marcin Dulak]

Hi,

On 01/25/13 15:48, Stefan Taubert wrote:
> Hi Marcin,
>
>
> 2013/1/25 Marcin Dulak <Marcin.Dulak at fysik.dtu.dk>:
>>> /l/Programs/GPAW/gpaw-setups/gpaw-setups-0.8.7929
>>>
>> ValueError: Too few bands!  Electrons: 21.000000, bands: 3
>> means that new (0.9) setups are being used with 0.9.0.8965 GPAW release.
> Yes, that was the first failing test that I sent you the logs from.
> Since, on you advice, I changed to using 0.8 version of the
> gpaw-setups and re-ran the tests. The tests just finished and it turns
> out that only three tests fail, as compared to 19 before:
> pw/interpol.py
> bulk.py
> wannier_ethylene.py
>
> Using the combination: gpaw-0.9.0.8965 / ase-3.6.0.2515 / gpaw-setups-0.8.7629
>
> The log is attached.
this looks OK. The gpaw-0.9.0.8965 is quite old, and those 3 problems 
are most likely already fixed in the trunk.

Best regards,

Marcin
>
> Best regards,
> Stefan
>
>
> _______________________________________________
> gpaw-users mailing list
> gpaw-users at listserv.fysik.dtu.dk
> https://listserv.fysik.dtu.dk/mailman/listinfo/gpaw-users


-- 
***********************************
  
Marcin Dulak
Technical University of Denmark
Department of Physics
Building 307, Room 229
DK-2800 Kongens Lyngby
Denmark
Tel.: (+45) 4525 3157
Fax.: (+45) 4593 2399
email: Marcin.Dulak at fysik.dtu.dk

***********************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listserv.fysik.dtu.dk/pipermail/gpaw-users/attachments/20130125/54987702/attachment.html