[gpaw-users] [gpaw-developers] gpaw tests fail on Ubuntu 12.04

[Stefan Taubert]

Dear Marcin,

thank you for the kind assistance!

Best regards,
Stefan



2013/1/25 Marcin Dulak <Marcin.Dulak at fysik.dtu.dk>:
> Hi,
>
>
> On 01/25/13 15:48, Stefan Taubert wrote:
>
> Hi Marcin,
>
>
> 2013/1/25 Marcin Dulak <Marcin.Dulak at fysik.dtu.dk>:
>
> /l/Programs/GPAW/gpaw-setups/gpaw-setups-0.8.7929
>
> ValueError: Too few bands!  Electrons: 21.000000, bands: 3
> means that new (0.9) setups are being used with 0.9.0.8965 GPAW release.
>
> Yes, that was the first failing test that I sent you the logs from.
> Since, on you advice, I changed to using 0.8 version of the
> gpaw-setups and re-ran the tests. The tests just finished and it turns
> out that only three tests fail, as compared to 19 before:
> pw/interpol.py
> bulk.py
> wannier_ethylene.py
>
> Using the combination: gpaw-0.9.0.8965 / ase-3.6.0.2515 /
> gpaw-setups-0.8.7629
>
> The log is attached.
>
> this looks OK. The gpaw-0.9.0.8965 is quite old, and those 3 problems are
> most likely already fixed in the trunk.
>
> Best regards,
>
> Marcin
>
> Best regards,
> Stefan
>
>
>
> _______________________________________________
> gpaw-users mailing list
> gpaw-users at listserv.fysik.dtu.dk
> https://listserv.fysik.dtu.dk/mailman/listinfo/gpaw-users
>
>
>
> --
> ***********************************
>
> Marcin Dulak
> Technical University of Denmark
> Department of Physics
> Building 307, Room 229
> DK-2800 Kongens Lyngby
> Denmark
> Tel.: (+45) 4525 3157
> Fax.: (+45) 4593 2399
> email: Marcin.Dulak at fysik.dtu.dk
>
> ***********************************